2021 Jeep Wrangler Rubicon 4xe

Jeep revealed the plugin-hybrid 2021 Rubicon 4xe promising normal 4x4 performance.

The 2021 Jeep Wrangler 4xe— pronounced four-by-e —became a reality in a public online reveal event from Jeep facilities in Detroit, Michigan.

The Wrangler 4xe boasts 375 horsepower and delivers up to 25 miles of pure electric operation. It's powered by a 400-volt, 17 kWh, 96-cell battery pack mounted beneath the second-row seat to protect it from outside elements and preserve interior space.

The Wrangler 4xe’s advanced turbocharged 2.0-liter four-cylinder engine, two electric motors and robust TorqueFlite eight-speed automatic transmission combine to deliver an estimated 50 MPGe.

All high-voltage electronics, including the wiring between the battery pack and the electric motors, are sealed and waterproof.

Jeep Stresses 2021 Wrangler 4xe 4x4 Credibility

The Wrangler comes with Trail Rated running gear:

  • Skid plates and front and rear tow hooks
  • Wrangler Rubicon 4xe approach angle of 44 degrees, breakover angle of 22.5 degrees, departure angle of 35.6 degrees and ground clearance of 10.8 inches (27.4 cm)
  • Aggressive, available, 17-inch, off-road wheels and 33-inch tires standard on Rubicon 4xe; 20-inch wheels standard on Wrangler 4xe and Sahara 4xe
  • Up to 30 inches (76 cm) of water fording

The Wrangler 4xe hybrid powertrain has three modes of operation, known as E Selec. The driver can select the desired powertrain mode via buttons mounted on the instrument panel, to the left of the steering wheel. Regardless of the mode selected, the Wrangler 4xe operates as hybrid once the battery nears its minimum state of charge.

2021 Jeep Wrangler Rubicon 4xe drivetrain

  • Hybrid: The default mode blends torque from the 2.0-liter engine and electric motor. In this mode, the powertrain will use battery power first, then add in propulsion from the 2.0-liter turbocharged I-4 when the battery reaches minimum state of charge

  • Electric: The powertrain operates on zero-emission electric power only until the battery reaches the minimum charge or the driver requests more torque (such as wide-open throttle), which engages the 2.0-liter engine

  • eSave: Prioritizes propulsion from the 2.0-liter engine, saving the battery charge for later use, such as EV off-roading or urban areas where internal combustion propulsion is restricted. The driver can also choose between Battery Save and Battery Charge during eSave via the Hybrid Electric Pages in the Uconnect monitor

Wrangler Rubicon 4xe models carry the Rock-Trac 4x4 system that includes a two-speed transfer case with a 4:1 low-range gear ratio, full-time 4x4, front and rear next-generation Dana 44 axles, Tru-Lok electric front- and rear-axle lockers. The Wrangler Rubicon 4xe a crawl ratio of 77.2:1.

The Wrangler 4xe includes Selec-Speed Control with Hill-ascent and Hill-descent Control. This allows drivers to control vehicle speed up and down steep, rugged grades with the transmission shift lever.

2021 Jeep Wrangler Rubicon 4xe interior view

Jeep Wrangler 4xe, A Jeep You Can Still Make Your Own

Jeep Performance Parts and Mopar will offer a wide variety of factory-engineered, quality-tested performance parts and accessories for the most capable, technically advanced and eco-friendly SUV on the planet.

Jeep Performance Parts and Mopar will offer a 240-volt at-home electric vehicle (EV) wall charger on Amazon.com and quality installation services, giving customers a fast and convenient way to charge their vehicles at home.

Jeep Wrangler 4xe is available in three models: 4xe, Sahara 4xe and Rubicon 4xe. Wrangler 4xe and Wrangler Sahara 4xe models are equipped with full-time 4x4 systems, front and rear next-generation Dana 44 axles and are fitted with the Selec-Trac two-speed transfer case with a 2.72:1 low-range gear ratio.

2021 Jeep Wrangler Rubicon 4xe battery and engine