2020-2022 Ford F-250 SuperDuty Sync 3 to Sync 4 with Wireless Apple CarPlay™ and Android Auto™ Upgrade

INTRODUCTION

• Our reconditioned Genuine Ford® parts feature a 90-day guarantee and a hassle-free return policy. Extended warranties are also available!

• Upgrade to the award winning Sync® 4 system today!  SYNC 4 has many added or improved features compared to SYNC 3. The interface looks better and runs more smoothly due to enhanced graphics and faster processing. The new “skin” of the system makes the visuals look sleek and modern, plus they’re more customizable!

• Simply remove your existing 8-inch Sync 3 display, swap the Sync "APIM" module attached to the rear of the display (3 screws), and install factory keyed plug & play wiring. Done!
  

• Full Wireless Android Auto™ and Apple CarPlay™ support.

• Supports English, French, & Spanish languages.

• No-hassle, Plug & Play system. Pre-programmed to your specific vehicle. Please notate your vehicle's 17-digit VIN after adding to your cart. Eligible for our Compatibility Guarantee. What's This?

VEHICLE COMPATIBILITY

2020-2022 Ford F-250 / F-350 / F-450 / F-550 SuperDuty

• Please let us know your vehicle's year/make/model and 17-digit VIN upon checkout using our Compatibility Guarantee form. What's This?
• If you don't see your vehicle listed, use our Year/Make/Model search located towards the top of your screen to find products tailored to your specific vehicle!

INSTALLATION

Installation of this product would be rated a 3 out of 5. 1 being extremely easy and 5 being extremely difficult. It is recommended prior to installing any automotive electronics that the negative battery terminal be disconnected.

1.  Remove the dash top speaker grille (retaining clips) then the two exposed screws.
2.  Remove the dash top tray (retaining clips).
3.  Remove the two screws at the top of the instrument panel bezel then pry the panel from the dash (retaining clips).
4.  Remove the four screws which hold the 8-inch Sync 3 display to the dash.
5.  Remove the Sync "APIM" module from the rear of the display (three screws) and replace it with the Sync 4 module included with the kit.
6.  Install the plug & play wire harness in-between the Sync "APIM" module and the factory Sync "APIM" plug. Done!

If you need any assistance along the way please feel free to visit our YouTube page or contact our customer support department. 

FEATURES

• Voice Activated GPS Navigation with turn-by-turn directions on display screen (optional - select above)
• Full Wireless Android Auto™ and Apple CarPlay™ support.
• Natural voice control.
• Twice the processing power compared to Sync 3.
• Plug & Play, no additional hardware or programming required. 

THINGS TO KNOW

• Over-the-air updates are currently not available when upgrading from Sync 3 to Sync 4.
• Pre- programmed to function with your vehicle's factory installed SiriusXM® satellite radio. If your vehicle is not equipped with SiriusXM the AM & FM radio presets cannot be saved within the Sync 4 system. If you would like to add SiriusXM capability be sure to check our Ford Satellite Radio Upgrade Kit.
• Pre-programmed to function with your vehicle's existing steering wheel mounted audio controls.
• Pre-programmed to function with your vehicle's existing back-up rear view camera. 
• Pre-programmed to function with your vehicle's existing Sync® bluetooth hands-free calling feature. Simply pair your phone to the new system.